South Bay Technology, Inc. Sample Mounting

Sample Mounting

The proper mounting of samples is a critical step in the lapping and polishing process. It is imperative that the sample is firmly mounted parallel to the sample mount surface to ensure accurate results. Typically, samples are mounted using a low melting point wax as an adhesive and a Sample Mounting Fixture to apply uniform pressure. Sample Mounting Fixtures are designed to both monitor the temperature of the wax and to provide a uniform mounting pressure.
[Read brochure...]

Sample Mounting Fixtures Price List ***Input Quantity and click submit at the bottom	Model/Part #	Price	Enter Qty.
Model 110 Single Wafer Mounting Fixture (Max. 2" diameter) The Model 110 is designed to mount samples up to 2" in diameter and is supplied with 6 pressure plates ranging in size from 1/2" to 2" diameter. The unit is also supplied with a set of tongs to lift the fixture when hot. The Model 110 is the most basic model and is ideal for routine sample mounting.	Model 110		Qty.
2" diameter pressure plate	01-02950-01
1.5" diameter pressure plate	01-02949-01
1.25" diameter pressure plate	01-02948-01
1" diameter pressure plate	01-02947-01
0.75" diameter pressure plate	01-02946-01
0.5" diameter pressure plate	01-02945-01
Tong Assembly	02-02907-01

Model 112 Single Wafer Mounting Fixture (Max. 4" diameter) Same as Model 110, but is designed to accommodate samples up to 4" in diameter. The Model 112 is supplied with 3" and 4" pressure plates.	Model 112		Qty.
4" diameter pressure plate	01-02937-01
3" diameter pressure plate	01-02953-01
Tong Assembly	02-02907-01

Model 115 Dual Position Sample Mount (2 samples/Max. 2" diameter) Dual Position Sample Mount - The Model 115 is designed to accommodate 2 samples up to 2" in diameter simultaneously and incorporates a thermometer to measure the temperature of the mounting wax. Wax temperature is monitored so it is not overheated which would create air pockets beneath the sample. The Model 115 is supplied with two sets of 6 pressure plates ranging in size from 1/2" to 2" in diameter and is ideal for mounting samples where absolute precision is required.	Model 115		Qty.
2" diameter pressure plate	01-02950-01
1.5" diameter pressure plate	01-02949-01
1.25" diameter pressure plate	01-02948-01
1" diameter pressure plate	01-02947-01
0.75" diameter pressure plate	01-02946-01
0.5" diameter pressure plate	01-02945-01
Tong Assembly	02-02907-01

Model 116 Six Position Sample Mount (6 samples/Max. 2" diameter) The Model 116 can accommodate 6 samples up to 2" in diameter simultaneously. The Model 116 is supplied with six 2" diameter pressure plates. Other size plates can be substituted.	Model 116		Qty.
2" diameter pressure plate	01-02950-01
Tong Assembly	02-02907-01

Accessories: Listed below are the various accessories that can be utilized with the various sample mounting fixtures.
Description	Model/Part #	Price
Hot Plate - The Model 120 is a specially designed hot plate that operates in a temperature range from 100° to 700°F (38° to 371°C). The Model 120 is UL listed and provides 49 square inches of heating surface in a low profile design. The hot plate consists of a durable cast aluminum base and a ceramic coated stainless steel top which provides excellent corrosion and thermal shock protection.	Model 120		Qty.
Hot Plate (230 V) - The Model 121 is a 230 volt version of the Model 120.	Model 121		Qty.
Cooling Tray - The Model 125 is intended to be used with the Model 120 or 125 Hot Plate and is designed so that a Sample Mount can slide directly from the hot plate onto the Cooling Tray without being lifted. The Cooling Tray consists of a large anodized aluminum plate with cooling fins that are designed to facilitate the rapid and uniform cooling of the Sample Mounting Fixture.	Model 125		Qty.

Sample Mounting Kit
Includes Model 110 Mounting fixture, Model 120 Hot Plate, Model 125 Cooling Tray and a selection of mounting waxes.	Model 10098		Qty.

South Bay Technology is no longer accepting web site orders. On October 4th, 2017 Ted Pella, Inc. purchased the products of South Bay Technology. Ted Pella, Inc. is in the process of evaluating and transitioning the products of SBT, which will happen over a period of the next several months. Please contact [email protected] for inquiries as to the status of products you wish to order.