South Bay Technology, Inc. Model 650 Low Speed Diamond Wheel Saw

MODEL 650 Low Speed Diamond Wheel Saw

The Model 650 Low Speed Diamond Wheel Saw is a compact, multipurpose, precision saw designed to cut a wide variety of materials with minimal subsurface damage. Its low speed makes it possible to cut fragile materials that would otherwise fracture and soft materials that would load the diamond wheel on a higher speed saw. A variety of sample holders provides a means for mounting any shape sample while goniometer adaptability simplifies cutting oriented crystals.

This product is now available from Ted Pella, Inc. Click here to re-direct to that item.

Click to see image	Optional Accessories Input quantity and click submit at the bottom	Item #	Price	Enter Qty.
	Single-Axis Goniometer -The Model 65001 has a graduated scale with a 0.2° vernier and can be rotated 360°. This rotational capability makes it ideal for precisely slicing single crystals. The sample is mounted to a block using a low melting point wax and the block is subsequently clamped into the Model 65001. Wax mounting of the sample ensures that the cut piece will remain attached to the holder and will not be damaged by falling after being cut.	Model 65001		Qty.
	Double Clamp Sample Holder - The Model 65003 is a clamp type holder designed to clamp both ends of a round or rectangular rod while cutting between the two clamped positions. The Model 65003 can also be used as a single clamp holder to hold encapsulated metallurgical samples up to 1.25" in diameter.	Model 65003		Qty.
	This Model 65004 Petrographic Sample Holder uses vacuum to hold 1 in. x 2 in. petrographic microscope slide with a petrographic sample cemented to it. The sample can be aligned with the diamond wheel on the Model 650 to cut a thin sample.	Model 65004		Qty.
	2-Axis Goniometer - When the Model 65005 is used with the vernier on the Model 650, the combination is a 2-axis Goniometer.	Model 65005		Qty.
	The Model 65011 track mount is for holding Model 65005 2-axis Goniometer for x-ray or optical orientation.	Model 65011		Qty.
	The Model 65006 Vise Holder is used for holding odd shaped samples that can be held with a vise.	Model 65006		Qty.
	The Model 65007 Right Angle Holder for holding sample at right-angles to wheel, using the same mounting blocks that are used on Models 147, 150, and 155 lapping fixtures (or any mounting block that has an 8-32 thread).	Model 65007		Qty.
	The Model 65008 Ball Joint Holder uses an adjustable ball with an 8-32 screw for holding standard SBT mounting blocks.	Model 65008		Qty.
	The Model 65012 Dressing Stick Holder is used to rigidly hold dressing stick when moving it into the diamond wheel to expose fresh diamonds, instead of risking damage to the wheel when holding it by hand.	Model 65012		Qty.
	Model 65014 Sample Rotation System	Model 65014		Qty.
	Model 65016 Ball Joint Work Arm	Model 65016		Qty.
	Model 65017 Bone Chuck Holder (For holding irregular shaped parts)	Model 65017		Qty.
	Model 65018 Right Angle Bone Chuck Holder (For holding irregular shaped parts)	Model 65018		Qty.
	Model 65019 Adjustable Right Angle Bone Chuck Holder (For holding irregular shaped parts)	Model 65019		Qty.
	The Model 65040 Sample Alignment Microscope is used to align where a cut is to be made using a monocular microscope with a 4 in. working distance and cross hairs.	Model 65040		Qty.
	Support Table (table saw attachment)	01-02308-01		Qty.

MODEL 650, 660, 810 AND 850 SAW MOUNTING BLOCKS
Input quantity and click submit at the bottom
Aluminum Blocks	Part #	Price	Enter Qty.
1" WIDE X 3" LONG X 0.25" THICK	01-01085-01		Qty.
1" WIDE X 1.5" LONG X 0.25" THICK	01-01086-01		Qty.
2" WIDE X 2" LONG X 0.25" THICK	01-01087-01		Qty.
1.5" WIDE X 2" LONG X 0.37" THICK	01-01088-01		Qty.
1.5" WIDE X 4" LONG X 0.37" THICK	01-01089-01		Qty.
1" WIDE X 4" LONG X 0.5" THICK	01-02519-01		Qty.
1" WIDE X 2" LONG X 0.5" THICK	01-02521-01		Qty.
Graphite Blocks
1" DIAMETER X 0.12" THICK	01-01237-01		Qty.
1.5" DIAMETER X 0.12" THICK	01-01238-01		Qty.
2" DIAMETER X 0.12" THICK	01-01239-01		Qty.
0.87" WIDE X 2.5" LONG X 0.12" THICK	01-01063-01		Qty.
0.87" WIDE X 0.87" LONG X 0.12" THICK	01-01064-01		Qty.
1.87" WIDE X 1.87" LONG X 0.12" THICK	01-01080-01		Qty.
1.37" WIDE X 2" LONG X 0.18" THICK	01-01084-01		Qty.
.25" WIDE X 2" LONG X 0.25" THICK	01-01096-01		Qty.
0.37" WIDE X 2" LONG X 0.37" THICK	01-01095-01		Qty.
0.5" WIDE X 0.75" LONG X 0.12" THICK	01-01090-01		Qty.

***Hover Over Application Number to See Title or Click Here for a Complete Listing
Application Notes: 13, 14, 17, 37, 38, 39, 49, 66, 70, 77, 89, 113

South Bay Technology is no longer accepting web site orders. On October 4th, 2017 Ted Pella, Inc. purchased the products of South Bay Technology. Ted Pella, Inc. is in the process of evaluating and transitioning the products of SBT, which will happen over a period of the next several months. Please contact [email protected] for inquiries as to the status of products you wish to order.

Model 650HC Low Speed Diamond Wheel Saw (for use in hot cell)
The Model 650HC was modified by replacing the rubber drive belts with metal chain drives used with metal sprockets. Dry bearings or bearing with special lubrication can be supplied. The covers have been removed to provide better access to the inside of the saw.